Metal affects RFID
If an RFID transponder is in direct contact with metal, the surface can affect the antenna’s performance and thus significantly reduce readability.
Phone: +49 8233 846-0
Email: info@sp-samson.com
Design Credits I Data protection I TCD I TCP I Compliance | Sitemap
The ID4track® RFID Bridge is a specially developed RFID on-metal label. Thanks to its pre-defined perforations and the matching application aid, the label takes on the intended shape when applied, maintaining a gap between the label and the metal surface.
If an RFID transponder is in direct contact with metal, the surface can affect the antenna’s performance and thus significantly reduce readability.
The RFID label applicator shapes the label as it is applied and creates the necessary gap between the RFID inlay and the metal surface.
This solution comprises two components that work together: the specially designed RFID bridge label and the corresponding applicator. The label provides identification and RFID functionality, while the applicator ensures the correct shape and distance from the metal surface during application.
The label is designed for use with the corresponding applicator. The pre-defined perforations allow the label to be folded in a controlled manner. Once the applicator has been removed, this creates the intended shape, with a gap between the label and the metal surface.
Designed for adhesion to rough metallic surfaces.
Resistant to mechanical stresses such as bending, wind and movement.
Sufficient reading range for applications such as RFID scanning at lorry gates.
It can be printed on and labelled individually using a thermal transfer printer with an RFID module.
The applicator shapes the RFID Bridge along the perforations into the required form and creates the necessary distance from the metal surface. Once it has been secured, it is removed again. The label remains on the surface. In the video, you can see it being applied directly to the component.
The applicator facilitates the consistent application of RFID labels to metallic surfaces.
Place the label applicator on the metal surface and position the RFID label over the positioning aid.
Attach the label to the metal using the designated adhesive surfaces above and below the applicator.
Pull out the positioning aid. The RFID label retains its defined curvature and the required distance from the metal.
Would you like to test whether the RFID Bridge label and the applicator are suitable for your RFID-onMetal application?
Please get in touch. We can help you choose the right solution and carry out an initial practical test.